Posted by: jim saubier
01/03/2002, 07:57:54
|
Check out the article in the article section entitled "Hebee article". I believe that the fireforming loads that I used are in there and should do the job for the AB that you are using as well. Reloder 7 is the powder that i used. Since you say that you already have loading data, you can also reduce from those charges a couple of grains and work up from there until you are blowing out the case pretty full. Don't try to blow them out to perfect crisp shoulders or you may end up splitting a neck/shoulder. I also am a believer of annealing before fireforming. What this does is softens the brass that has been work-hardened during the case forming steps. Others have fireformed without annealing and have experienced satisfactory results. Congratulations on the BEE, you are gonna love it. The favorite powders for mine were Reloder 7 and n130. The 20 grain Starkes are also the best in mine. The 20 grain V-maxes do a good job also.
|
