Saubier.com  



Go Back   Saubier.com > Members List

Bill K Bill K is offline

Senior Member

Visitor Messages

Showing Visitor Messages 1 to 10 of 14
  1. Bill K
    12-31-2023 02:00 AM
    Bill K
    Chuck. Don't know if you have any gun smiths in your local area. I have had fine results with one I deal with on re-chambering a few of my barrels. I would check some local ones first then reach out to other places.
    I would either contact Par-nor or talk with Manson Reamers if you want to obtain a reamer or have them do the work. About all I can offer on this end. Bill K
  2. charlesasmith
    12-31-2023 01:20 AM
    charlesasmith
    Hi Bill: Wondered if you have a suggestion for me. I have an old Pac-Nor 12 twist .224 barrel that I would like to have chambered in 22BR. I do have new 1,250 factory Remington primed brass available, but would rather go with a Norma chambering. I also would like a 0-0.030 freebore reamer. I plan on, hopefully, shooting the 53 gr V-Max or Nos 53 gr Varmageddon bullets.

    Do you have any suggestions for a rental or reamer manufacturer?

    Chuck
  3. Bill K
    10-06-2023 03:10 PM
    Bill K
    Yes, I thought I sent a PM telling you. All safe and sound now. I thought you would just keep that shell holder instead of returning it.
    I will hang onto it, someone else may need one or you might want a second one. Stay safe and well and do a lot of shooting. Bill K
  4. rider
    10-06-2023 12:34 PM
    rider
    Bill,
    Did you receive the shell holder for the 4.6 x 30. I sent it about a week ago.
    Lynn Rider
  5. Nor Cal Mikie
    05-03-2022 12:32 AM
    Nor Cal Mikie
    $$$ for Fireball dies, Got it!! Thank you and keep well, Mike.
  6. 358SCOTT
    10-11-2021 11:39 PM
    358SCOTT
    Bill,
    I thought I read you were looking for a CZ 527 magazine. There is one on Acc. Shooter today.
    Scott
  7. Bill K
    04-24-2021 02:04 AM
    Bill K
    I have and am also playing some with 4198 and results are comparable. May work some more with it.
    However, right now, I have a good supply of 1680 and it works.
    I could or would take 50-100 cases, if you could spare them. Let me know a price.
  8. Bob Acker
    04-24-2021 01:53 AM
    Bob Acker
    I'm afraid I sent two PMs Didn't think the first one went thorough.
    Oh well, some day I'll get the hang of this.
    I'm getting about the same results with the 1680 but I believe with the current situation 4227 might be easier to find. I started off using VV N120 but it doesn't work any better than 4227 and its a hell of a lot more expensive.
    Never would have tried 4227 had I not read it in the book. When I run out of things to do I've thought about trying a full case of 4198 as PO suggested.
    The 17 hornet is a really fund cartridge.
    I have a pretty good stash of hornet brass and could spare a little if you are running low. Don't want the varmints to go unmolested.
    Bob


    Bob

    Bob
  9. Bill K
    04-24-2021 01:22 AM
    Bill K
    Bob: That is funny. As I am also using one load of 11.2 4227(IMR) with the 15.5 NTX and doing just about equal to yours.
    I also have a load of 11.8 AA1680/15.5 ntx, that is right in the same ball park, 1/2 inch and smaller groups and 3800 ish. Both do a number on varmints, up to the size of Rock Chucks, within 150-200 yrds. Bill K
  10. Bob Acker
    04-24-2021 01:08 AM
    Bob Acker
    Bill
    Back aways I sent you some info from PO Ackley's book on loading the 17 hornet.
    What did you finally settle on and what kind of velocities and groups are you getting?
    I've been using the 15.5 NTX and 11.2 grs of 4227. Velocities are around 3850 with 5 shot groups averaging around 3/8" and sometimes a little better. Probably would not have tried 4227 were it not for the book
    Thought I'd check and see how you are doing.
    Bob

About Me

  • About Bill K
    Biography
    80 years young and still going.
    Location
    N.E. Kommie Kalifornia
    Interests
    Shooting, Fishing, Hiking, wanderin the sage and mountains
    Occupation
    Basically retired

Statistics

Total Posts
Albums
Visitor Messages
General Information
  • Last Activity: Today 04:12 PM
  • Join Date: 08-16-2012
  • Referrals: 0

Friends

Showing Friends 1 to 2 of 2

All times are GMT. The time now is 04:31 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.