Saubier.com

Saubier.com (http://www.saubier.com/forum/index.php)
-   Small Caliber Load Data (http://www.saubier.com/forum/forumdisplay.php?f=8)
-   -   204 ruger and tac powder loads. (http://www.saubier.com/forum/showthread.php?t=36741)

varmit_master 05-27-2020 03:38 AM

204 ruger and tac powder loads.
 
I picked up another pd of Tac today. I want to try it with some 35gr Berger or 40gr Berger. Is Tac a good powder for 204? I use RL10 and H4895 mostly. But seen this for 23.00 today . So I picked it up. I loaded a few tonight to see how they group. Thanks

moorepower 05-28-2020 02:32 PM

You should be at a good burn rate for the .204 especially with the 39-40 grain bullets. I only use 8208 any more but TAC is just a smidge slower so it should work well.

pauls 08-06-2020 10:55 PM

I use TAC in both my .204's - one uses 27.2 grains and the other is 27.0 grains, both with 40 grain VM's.
Good velocities and clean burning ( a must for high volume prairie dog loads ).
I can't recall the velocities off the top of my head but both are in the 3700 + fps range ( 26" barrels ).

varmit_master 08-07-2020 05:21 PM

I loaded up 40 gr Berger and Tac. I think mine was 27.1 gr I used. That load shot very well out of my 204 also.


All times are GMT. The time now is 10:49 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.