Saubier.com

Saubier.com (http://www.saubier.com/forum/index.php)
-   Project Guns (http://www.saubier.com/forum/forumdisplay.php?f=9)
-   -   reamer question 17VHA (http://www.saubier.com/forum/showthread.php?t=24983)

17tbs 02-12-2014 10:15 PM

reamer question 17VHA
 
I'm trying to get a reamer made for 17VHA with a .197" neck, 40° shoulder, and a tight chamber design overall. 0.3045" shoulder, 0.3125" at the case head. Tapered throat from 0.1730" to 0.1725", 0.035" freebore.

Is ir possible to get some guidance? My goal here is twofold, accuracy and long case life.

Hutch.

bowfisher 02-13-2014 12:56 AM

Without measuring, off the top of my head I can tell you that base measurement is too tight. The brass I have all measures .3115 to .312 just above the extractor grove.

I have a normal shoulder reamer and getting a 35 deg made, they are both .314, fwiw.

I'd get the brass you want to use and send it to the reamer maker of your choice and go from there.

17tbs 02-13-2014 06:01 PM

split the costs?
 
Hey, since you and I are doing the same thing essentially would you mind lowering your cost by 50% and splitting it if our reamer designs are close enough ?


All times are GMT. The time now is 10:58 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.