Saubier.com

Saubier.com (http://www.saubier.com/forum/index.php)
-   Project Guns (http://www.saubier.com/forum/forumdisplay.php?f=9)
-   -   Custom Sako P94S (Finnfire) (http://www.saubier.com/forum/showthread.php?t=34288)

South Pender 06-02-2018 08:26 PM

Custom Sako P94S (Finnfire)
 
My custom Sako P94S project just completed. All metalwork by Ed LaPour; all wood and engraving by Bruce Farman--both in Bremerton, WA and members of the American Custom Gunmakers Guild. The bottom metal is a reworked Blackburn unit designed for the Winchester 52, with the hinged floorplate release in the trigger bow. Trigger is a Jewell with bottom safety. Barrel is the original Sako varmint barrel octagoned and reduced in weight. Gun with soldered bases for Talley vertical rings weighs 6 lbs. 13 oz. Wood is English walnut with 24 lpi checkering.

https://i.imgur.com/Bm04nhw.jpg?1
https://i.imgur.com/6aEKb5R.jpg?1
https://i.imgur.com/IFoDR6R.jpg?1
https://i.imgur.com/yFOSaHE.jpg?1

ray h 06-02-2018 08:33 PM

Now that's a well done rifle, congratulations. Hope it's not a safe queen.

BG17 06-02-2018 09:09 PM

wow
 
now that is well dun
what scope are you going to mount ???
keep us posted on how it shoots


great after seeing that i well never be able to look at my brno model 2 the same again:eek:
i think ol cut it up and scrap it so it can be made in to something nice like door hinges

once again very nice 22

TinMan 06-02-2018 09:20 PM

That rifle is just plain gorgeous! Nice design and implementation. Please give us a few more pictures with some brighter lighting. I couldn't quite make out the grain well enough in the stock. Thanks for sharing.

South Pender 06-02-2018 09:46 PM

No chance it will be a safe queen!

Looks as if I'm restricted to 4 images per post, so here are 4 more:

https://i.imgur.com/rvP8We1.jpg?1
https://i.imgur.com/pePUPl5.jpg?1
https://i.imgur.com/54qWp1h.jpg?1
https://i.imgur.com/G31AxWJ.jpg?1

South Pender 06-02-2018 09:54 PM

A couple more images. I had Ed and Bruce make up two sets of Talley rings, one for 1 inch scopes and one for 30 mm. scopes. All metal parts were cold rust blued. I had two sets of action screws made up--one set with hex heads for everyday use and one with thin slot heads more for "show".;)

https://i.imgur.com/xm4wCXJ.jpg?1

Since the project was aimed at producing an all-out .22LR hunting rifle, I got a March 1-10X24 scope. I has a huge 105 ft. FOV at 100 yds. on 1-power and enough top end on 10-power for typical .22LR hunting ranges. It also focuses and is parallax-free down to 10 yards.

https://i.imgur.com/WWJc87i.jpg?1

426nut 06-04-2018 01:15 AM

That is fantastic! She has beautiful lines. E.

johno 06-04-2018 06:56 AM

Absolutely stunning

Johno


All times are GMT. The time now is 12:28 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.