AA1680 17 Fireball
 

I use 1680 in my 17 hornet w/ 20 Gr. Vmax, and have for a number of years.
Excellent velocity, and accuracy.
I would like to try it in my finicky 17 fireball. Have not seen any 1680 load data for the fireball, although data is for 221 fireball is published.
if anyone here has experience with 17 fireball and 1680, I would sure appreciate your results.
Thank you for reading
Chuck
Sure enjoy this site

It looks too fast of a burn rate for a .17 FB

H322 or AA2200 and a 20 grain Vmax

17 fireball powder
 

DOGHUNTER12
A FRIEND OF MINE USES RAMSHOT EXTERMINATOR WITH HORNADY
25gn V-MAX WITH GREAT RESULTS AND LOADS VERY EASY WITH SMALL
NECK CARTRAGE.

I am another person who has used and preferred Ramshot XTerminstor

I tried alot of different load combinations with my Fireball and even changed the barrel til I found a load with benchmark and 25 gr bullets that worked.

You could probably work out a load on Quick Load, but I agree with moorepower, to me that is too fast a powder to give optimal results in the 17 FB. I load Lil'Gun, which is even faster in the 221 FB with 40 and 50 grain bullets, but 17 is a LOT smaller diameter bore with the same case capacity. I would go Benchmark too, anything faster, like 4198 didn't produce good accuracy or top velocities for me.

H322 and 25 grain Bergers work well for me...........

17 Fireball
 

I agree with Herb, h-322 and a 20-25 gr bullet with CCI 400 and you have a winning combination.

-Darrell

H322 and 20 gr varmaggedon shot. 066” and over 4200 in my rifle.
I did try A1680 16.4 gr with the same bullet. Just over 4000 fps shot .722