Saubier.com

Saubier.com (http://www.saubier.com/forum/index.php)
-   Small Caliber Load Data (http://www.saubier.com/forum/forumdisplay.php?f=8)
-   -   20 Practical X-Terminator/32 gr vmax Load data (http://www.saubier.com/forum/showthread.php?t=34092)

GLWenzl 04-16-2018 03:30 AM

20 Practical X-Terminator/32 gr vmax Load data
 
Somehow I lost my load data for the 20 Practical for the AR-15 upper I got from Adam. I couldn’t even remember if it was X-Tetm or Tac.

Finally settled on a load of 26 gr of X-Term using the 32 gr vmax and seated to fit the magazine, 2.250. I was looking over the 20 tactical loads for a reference.

I was surprised to see a nice group dead on vertically but it was about 2-1/2” to the left? Must not have been the same load or someone messed with my scope lol

Waiting on warmer weather and no snow to shoot some more with it.

Meantime if anyone has any Ramshot load data I’d be interested.

Bill K 04-16-2018 04:00 AM

20 Practical X-Terminator/32 gr vmax load
 
GL. My western reloading book shows start load of 24.0 & max load 26.6 with the 32 grain bullet. This is for a 20 Tac, but that load data can be used with the 20 Practical also. If this helps. Bill K :)

GLWenzl 04-16-2018 04:18 AM

Thanks Bill and I was looking at the same data,it helped me get to where I am at.

GrocMax 04-22-2018 06:23 PM

Keep in mind X-Term and 2230 are the exact same powder these days.

If you are familiar with H335 and BLC2 2230/X-Term is a scootch quicker than H335 and TAC is close to BLC2.

redrock ranger 04-23-2018 01:18 PM

20 practical loads
 
IMR 8208 XBR works well also, with 39 & 40 bullets in my bolt gun.

moorepower 04-23-2018 02:51 PM

Quote:

Originally Posted by redrock ranger (Post 269678)
IMR 8208 XBR works well also, with 39 & 40 bullets in my bolt gun.

What is your load. Getting ready to work up a load and since I use 8208 in my .204....

GrocMax 04-24-2018 03:25 AM

Benchmark and 8208 are very close to each other in 20P, I'd suggest a sane starting charge of about 24.0g for either powder for a 32g-34g bullet and you may end up in the 26g+ area for full pressure 4000FPS loads.

Hodgdon needs to update the 204R and 20T load data those bullets (33g vmax, 36g Berger) ain't been around for a long time now.

I've used a bunch of H335/WC844 in 20P it works well if you have some to burn.

Its harder to find a 223 powder that DOESN'T work well in 20P, not picky at all.

redrock ranger 04-24-2018 01:12 PM

Imr 8208 XBR
 
Quote:

Originally Posted by moorepower (Post 269681)
What is your load. Getting ready to work up a load and since I use 8208 in my .204....

Standard disclaimer for load data. Currently 24.5 gr. of 8208 XBR with a Sierra 39gr. Blitz King. This is in LC 09 brass.

Ciwski 07-22-2018 10:47 PM

20Prac with 39/40 grainers
 
redrock ranger, did you stop at 24.5 grains due to pressure or did you find a hammer?

x32030 07-23-2018 12:06 AM

20 tac & 20 Prac
 
I've had great luck with 10 X flavored Alliant in my 20 tac. Start around 24.0 and work up. I'm good at 25.1. Dave


All times are GMT. The time now is 03:20 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.