.20 practical reloading data
 

Who has used Alliant reloader 10 x
I'm looking for a load in my AR-15
LC brass
Remington 7 1/2 br primer
Hornady 40 gr. V-max # 22606
Powder Alliant reloader 10x charge weight

Looking for reloader 10 data only
Thanks guys

Not one soul has tried 10×????

I checked two reloading websites and no luck on 10x. You may get someone on accurateshooter.com that's tried it. There's quite a few threads on the 20 Practical. Do a search on varmints & small caliber.

20 Practical reloading data
 

I did try a few loads in my 20 Practical, when I started with one, but did not have good results, might not have given it a good enough try, but have since settled on H or imr 4198 for the best loads in my rifle (which is now a 20-223ai/40 degree shoulder) Accurate Shooter site, under 20 cal, shows a couple of other powders that work very well in the 20 Practical. However 10x is not one of them.
Maybe someone has given it a through go and has or can help you with info on 10x. Bill K :):)

Just for you info, with 4198 and CFE 223, in my rifle I am running around 3900 fps with 32 grainers, with good accuracy and fine hits on various critters.

20p with 10x
 

I have loaded up to 26gr of 10x behind a 32zmax in both my savage CBI 20p and in my cooper 20TAC. I got speeds up to 4300 fps. too hot for me, so I switched to 2015 and am now at about about 4000. my other (2) 20p's I shoot 2015 and 40gr vmax. and they are remington actions. the twist are either 11 or 12. I did get good results at about 24gr of 10x and may try again

Tried it out in my .20 practical AR..it's not a good powder of my rifle..just wanted to try it out

Try H4198, Benchmark, H335...all have performed well for me but H335 is more temp sensitive. If you would like me to get you data on any of these powders send me a PM

Also N133, 4895/H4895, 8208XBR, N135, 2230/X-Term, H322, 2015, BLC2, 2460, 4320, list goes on.

20 Practical
 

I use a Criterion 1/11 twist 26"
39 gr, SMK w/ 23.4 of RL 10-x shoots at about 3850 fps.
Favorite load is a 35 gr. Berger w/ 22.0 gr of H4198- absolute tack driver and great coyote load. Very little fur damage if any.

Sorry, no help here. I shot 8208 and N133 yesterday with 40 gr. Vmax. Now I have to decide which one to use as both shot great.