I did mine, with much success, using a 222 rem FL die, no guts to move the shoulder back to where I wanted it. Then necked it down the rest of the way using a custom bushing die, for another rifle, finally the 17rem FL die. I would anneal before you use the 17Rem FL die, make sure you lube the insides of the necks too.
I expanded mine back up with the K&M 17 expandiron, then turned the necks so they were all the same...the last batch of 204 brass, wasn't very consistent in the neck thickness.
Larry
__________________
Pray for Obama. Psalms 109:8
American King James Version
Let his days be few; and let another take his office
|