View Single Post
  #6  
Old 05-27-2014, 08:10 PM
Nor Cal Mikie Nor Cal Mikie is offline
Supporting Member
 
Join Date: Jul 2010
Location: 125 miles North of San Francisco.
Posts: 1,104
Default

One thing I've done is switched to "Map Gas". Hotter flame and less time needed to bring the brass up to temp. Less chance of the heat traveling down to the case head. Maybe a 4 or five count usually gets the job done.
I use a rechargable drill motor and slow speed and a deep socket stuffed with steel wool to keep the brass at the level I'am after. No water dump after. Just don't be in a hurry to pick up the cases.

Last edited by Nor Cal Mikie; 05-29-2014 at 11:19 AM.
Reply With Quote