Removing the bolt handle retaining screw is just like removing the barrel nut. First time can be a real bi**h!! Once it's broken loose, there's no need to ever tighten it again that tight. When removing the barrel nut, you can pull all you want. All you'll end up with is rounded off corners. For the handle retaining screw, it's the shock (stomp) that will have a better chance of braking it loose.
If you can secure the bolt , you could use a hammer to hit the Allen Wrench but, you're better off using your foot. Barrel nut goes the same way. Nut wrench and a hammer to hit the wrench with. THAT shock of steel on steel is what brakes it loose. Let us know how you make out.
|