#51
|
|||
|
|||
4199?
How much IMR or H4198 are you using under 20 or 25 gr bullets
|
#52
|
|||
|
|||
Still using this rifle, got back from my summer trip a couple weeks ago,
Running a suppressor this year. Makes it so the PD's just don't pay it much mind, I got into a fresh town, waaaayyy off the beaten path and had quite a day. By the time I was done there, I had used all of the 300rds I brought for this one, and was actually getting tired of shooting. Doesn't happen very often.
__________________
"I used to wear barrels out fretting over a bunch of things that don't amount to a rats petutie." |
#53
|
|||
|
|||
Still shooting the 20gr Nosler, wet moly bullets, with 300MP. I take the cleaning rod to run a patch or two down it after 150rds then back at it. Very little copper fouling at all with this Lilja. SilverFox wouldn't be happy if I didn't get any flower pics, lol.
__________________
"I used to wear barrels out fretting over a bunch of things that don't amount to a rats petutie." |
#54
|
|||
|
|||
Hey I'm assuming Bowfisher is a bowfisherman...also?
__________________
Steve |
#55
|
|||
|
|||
Bowfisher: Nice photo's and story. However you forgot the Hero photo, as LeRoy adds. Maybe next time, right ? Thank for sharing. Bill K
|
#56
|
|||
|
|||
Great read and photos, thanks for sharing.
Tom |
#57
|
|||
|
|||
i know this is an old thread but has anyone tried lilgun in their 17 vha?
__________________
I post here because it keeps the riffraff away. 'Life's Journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting, Holy sh!t... What a Ride! |
#58
|
|||
|
|||
Back when I played with it, I tried Lil gun, but it seemed overly touchy in pressure too me, so I just stuck with 1680.
|
#59
|
|||
|
|||
Lil gun?
I might try 300MP for a short barrel (under 19") and H4198 for longer barrels or with the heavier 25gr projectiles.
I had better groups with h4198 even though it is a slower powder than lil gun or MP300. KEEP US UPDATED. |
#60
|
|||
|
|||
17VHA Build help needed
I am looking to build a 17 VHA on a nice single shot action. Does anyone have a reamer I could either borrow or rent? Also, any suggestions on where I can find 4.6x30 brass or loaded ammo. Lastly, does anyone have a source for reloading dies?
Thanks in advance! EJ |
Thread Tools | |
Display Modes | |
|
|