#31
|
|||
|
|||
I'd like to see .......
..... measurements! Before and after case body diameter at the web bulge location, and then compare to other brand (Winchester) 17/22 hornet brass as well as Hornady brand, and compare to standard specs for the 17HH round. This just to eliminate sub size brass used for the ammunition.
I would not be too concerned about case length to the shoulder before first fireforming with any rimmed case. Last edited by Alan in GA; 04-10-2018 at 02:38 AM. |
#32
|
|||
|
|||
Fellow in Davenport, iA will rebarrel a rifle for $150 for the labor part.
I just paid $165 for my local guy to put a new barrel on an OLD rifle locally. Just to give you an idea what's out there and to compare with. I gave you my suggestions by pm. Hope it turns out well for you and the costs are within reason. Good luck. Be sure to let us know and I'd like to hear the costs by pm if you don't want to post it.
__________________
George "Gun Control is NOT about guns, it's about CONTROL!!" |
Thread Tools | |
Display Modes | |
|
|