#1
|
|||
|
|||
wtb .20 ppc reamer
I'm looking for a .20ppc reamer either to buy or pay for one time use. Preference would be no turn .237 neck with very short or no freebore. My present barrel, nearing the end of its life, shoots 55g. Bergers very well, but to reach the lands, bullets have to be seated way out--only about .030 bearing surface into the case. Any help or advice would be appreciated.
|
#2
|
|||
|
|||
I almost have what you need, but mine is a PTG I used on a 1-11 twist for 35-40 Bergers. I don't know what the freebore is. You might contact PT&G to ask them if it is suitable for your use (they had it in stock).
If you could use it... bouddha22@cox.net |
#3
|
|||
|
|||
Thanks. I'll get back to you after calling ptg. I'm still hoping that somebody has done just what I'm doing and still has the reamer.
|
#4
|
|||
|
|||
reamer
FYI, PTG will regrind that reamer to your specs for a nominal amount.
|
Thread Tools | |
Display Modes | |
|
|