#1
|
|||
|
|||
17 Fireball and AA2200
I'm curious if anyone is using AA2200 in their 17 Fireball. Can't seem to find any data. I use it in the 20 SCC and the 20 VT so assuming it will work well with the little 17FB.
|
#2
|
|||
|
|||
No data on 2200 but have used 2520 with 25s in the 17FB.
|
#3
|
|||
|
|||
i have used a lot of AA2200 in both 221FB and in 223Rem with 40gr bullets. I think it might be a tad fast burning for 17FB.
|
#4
|
|||
|
|||
No… but… Page 47 list a load for 20 and 25
https://ramshot.com/wp-content/uploa...ide8.0_WEB.pdf I like it in the 20-221 and the 221 but it seems so loud in my AR223 that I don’t use out there any longer. In the process of working up a 30 Herrett load with it though lol
__________________
Shoot First... Ask questions later... On Saubier.com __________________ NRA Lifetime Endowment Member |
#5
|
|||
|
|||
I've been around a 17Mach IV that shoots AA2230 really well. AA2200 maybe a little fast but might not hurt to try.
|
#6
|
|||
|
|||
Hog. I read somewhere that 2200 and 2520 are basically the same powder, just different makers. Could that be ? Anyone else seen that ?
Many of the reloading manuals do show the same loads for each with a given bullet. |
#7
|
|||
|
|||
I’ve never heard that Bill or know anything about it but I’d be surprised if they are according to their own BRC
https://ramshot.com/wp-content/uploa...burn_rates.pdf
__________________
Shoot First... Ask questions later... On Saubier.com __________________ NRA Lifetime Endowment Member Last edited by GLWenzl; 05-06-2022 at 03:24 PM. Reason: Corrected auto correct typos |
#8
|
|||
|
|||
I don't think this is the case. The burn rate progression is: AA1680, AA2200, AA2230, AA2460, and then AA2520.
|
#9
|
|||
|
|||
?? You can’t find data, 20 and 25 grain on their web site. It works well for me.
|
#10
|
|||
|
|||
It is the only powder I use in my 20SCC, have not tried it in the 17 fire ball. just may. However the load with 2200 that I have used in my 20SCC has worked for a few years now.
My loads in the 17 fb are with CFE Blk and 4198 and work very well, so, in a sense, why try it in it ? |
Thread Tools | |
Display Modes | |
|
|