Saubier.com  



Go Back   Saubier.com > Other Forums and Resources > Classifieds

Reply
 
Thread Tools Display Modes
  #1  
Old 07-07-2017, 06:12 PM
Jud96 Jud96 is offline
Junior Member
 
Join Date: Jul 2017
Location: New Manchester, WV
Posts: 10
Default .20 VarTarg Brass

Hey everyone, I was directed to this forum and was told there were some members here who made .20 VarTarg brass that's ready to load and requires no extra work. If anyone has some of this brass for sale I would like to buy some, thank you very much!
Reply With Quote
  #2  
Old 07-07-2017, 06:44 PM
JohnHenry JohnHenry is offline
Senior Member
 
Join Date: Jan 2008
Location: Northern Delaware
Posts: 484
Default

Welcome to the forum. Suggest you contact forum member ramos. He at times has 20VT brass available that he forms from Lake City 223 brass. Do you know the neck diameter of your 20VT chamber? 20VT brass is easy to form from 221 Fireball brass if you have a 20VT fl sizer.
__________________
John

Last edited by JohnHenry; 07-07-2017 at 06:50 PM.
Reply With Quote
  #3  
Old 07-07-2017, 06:50 PM
Jud96 Jud96 is offline
Junior Member
 
Join Date: Jul 2017
Location: New Manchester, WV
Posts: 10
Default

Quote:
Originally Posted by JohnHenry View Post
Suggest you contact forum member ramos. He at times has 20VT brass available that he forms from Lake City 223 brass. Do you know the neck diameter of your 20VT chamber? 20vt brass is easy to form from 221 Fireball brass if you have a 20VT fl sizer.
My chamber will have a .232 neck. I would prefer not to neck turn and hassle with anything extra.
Reply With Quote
  #4  
Old 07-07-2017, 07:12 PM
Bill K Bill K is offline
Senior Member
 
Join Date: Aug 2012
Location: N.E. Commie Kalifornia
Posts: 5,828
Default 20 VarTarg brass

Ramos, has formed brass, pretty regularly, locate him and send a PM or wait and he will probably answer you
Or purchase 222FB brass and run it though your fl sizer die and you will be set to go. Bill K
Reply With Quote
  #5  
Old 07-07-2017, 07:28 PM
x32030 x32030 is offline
Senior Member
 
Join Date: Dec 2013
Location: N. Indiana
Posts: 121
Send a message via Yahoo to x32030
Default .20 vt

Highplainsbrass.com a sponsor here.
Reply With Quote
  #6  
Old 07-07-2017, 08:18 PM
Jud96 Jud96 is offline
Junior Member
 
Join Date: Jul 2017
Location: New Manchester, WV
Posts: 10
Default

Quote:
Originally Posted by Bill K View Post
Ramos, has formed brass, pretty regularly, locate him and send a PM or wait and he will probably answer you
Or purchase 222FB brass and run it though your fl sizer die and you will be set to go. Bill K
If I use Norma or Nosler .221 brass, will it require neck turning after sizing it down? I always thought with a .232 chamber the Norma and Nosler was too thick after sizing to .20? Thanks
Reply With Quote
  #7  
Old 07-07-2017, 09:41 PM
JohnHenry JohnHenry is offline
Senior Member
 
Join Date: Jan 2008
Location: Northern Delaware
Posts: 484
Default

Jud96, I shoot Nosler 221 brass in my 221FB. Will form a 20VT from the Nosler 221 brass, seat a flat base bullet, and let you know the loaded neck diameter tomorrow morning. I am curious myself as I have a .232nk 20VT barrel for a switch barrel and I have not shot the 20VT barrel yet. Shooting the 221FB barrel.
__________________
John
Reply With Quote
  #8  
Old 07-07-2017, 09:52 PM
ramos ramos is offline
Senior Member
 
Join Date: Jun 2010
Location: Sherman County, Oregon
Posts: 2,567
Default

Quote:
Originally Posted by x32030 View Post
Highplainsbrass.com a sponsor here.

That will need neck turned. It will also be once fired before being formed.
Reply With Quote
  #9  
Old 07-07-2017, 10:23 PM
Nor Cal Mikie Nor Cal Mikie is offline
Supporting Member
 
Join Date: Jul 2010
Location: 125 miles North of San Francisco.
Posts: 1,073
Default

With "new" Remington Fireball brass, mine was pretty consistent. With "once fired" brass, it was all over the place. .232 on up. Never did try Norma or Nosler.
Solved that problem by getting a .234 neck VT reamer. Problem solved.
Didn't care that much for neck turning but after a while, I got into it and it wasn't as bad as I had made it out to be. If you're playing with Wildcats, like it or not, you do what needs doing.
Reply With Quote
  #10  
Old 07-07-2017, 11:27 PM
Jud96 Jud96 is offline
Junior Member
 
Join Date: Jul 2017
Location: New Manchester, WV
Posts: 10
Default

Quote:
Originally Posted by ramos View Post
That will need neck turned. It will also be once fired before being formed.
Do you still sell your .20 VT brass that you form from LC brass? Thanks
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:14 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.