Saubier.com  



Go Back   Saubier.com > Saubier.com Forums > Small Caliber Discussion Board

Reply
 
Thread Tools Display Modes
  #1  
Old 09-25-2022, 09:53 PM
JDHasty JDHasty is offline
Senior Member
 
Join Date: May 2015
Location: Wet side of Washington
Posts: 540
Default Another inexpensive tool I find handy

If you bed rifles in epoxy you end up with some stuck to the release agent on the barrel or action from time to time. I tended to to scratch it with my thumb nail to get it off, sometimes by the time it came loose my thumb nail was pretty ragged. A friend had one of these he used for that purpose and it works extremely well. I cut most of the blade length off the smallest which is the only one I use for that purpose and sharpened it back up on a belt sander. A piece of 320 grit sand paper glued to a piece of scrap wood keeps it sharp.


https://www.harborfreight.com/4-piec...SABEgKSaPD_BwE
Reply With Quote
  #2  
Old 09-26-2022, 06:08 AM
georgeld georgeld is offline
Senior Member
 
Join Date: Sep 2006
Location: Pueblo, CO
Posts: 5,764
Send a message via MSN to georgeld
Default

things work much easier if you just bed a small area at a time.
__________________
George

"Gun Control is NOT about guns,
it's about CONTROL!!"
Reply With Quote
  #3  
Old 09-26-2022, 06:09 AM
georgeld georgeld is offline
Senior Member
 
Join Date: Sep 2006
Location: Pueblo, CO
Posts: 5,764
Send a message via MSN to georgeld
Default

things work much easier if you just bed a small area at a time.

IF it sticks, it's lots easier to break it loose too.

I usually use either 5 or 10 minute epoxy.
__________________
George

"Gun Control is NOT about guns,
it's about CONTROL!!"
Reply With Quote
  #4  
Old 09-26-2022, 02:59 PM
JDHasty JDHasty is offline
Senior Member
 
Join Date: May 2015
Location: Wet side of Washington
Posts: 540
Default

Iím referring to small smears and little spots. Not the bedding itself. When I clean up along the receiver with a swab a small amount of smear will end up here ant there. I would scratch it off with my thumbnail before I saw one of these being used.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:10 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.