#1
|
|||
|
|||
Sako extractor
While looking at AR magazine adapter kits I saw PTG has Sako extractor kits.
https://pacifictoolandgauge.com/1273-sako-performance Anyone have experience with this, especially on 461 series? |
#2
|
|||
|
|||
I have a few of these. I used one to open up a 223 bolt face to magnum. They work. But the stock extractor usually does too. Are you trying to repair something? If you keep the same bolt face then when you remove the rem extractor there's a hole to fill. If you get a bolt from ptg then you can spec this type of extractor in the first place. These guys have a good reputation too:
https://www.longriflesinc.com/produc...n-to-m700-bolt |
#3
|
|||
|
|||
"carlsbad", Jerry Stephenson on accurateshooter.com does a great job on these, is reasonable on price and usually turns the work around quickly. Look him up.
|
#4
|
|||
|
|||
...based on your "461" reference, perhaps you were talking about actual Sako rifles? I'm pretty sure the ptg parts you linked are for converting remington 700 bolts.
|
Thread Tools | |
Display Modes | |
|
|