|
|
|
| |
|
#1
08-03-2011, 01:08 AM
|
|||
|
|||
17 PPC Loads
Anyone have any tips on forming brass and loads for a 17 PPC. Just purchased a BAT with a Krieger 9" twist barrel. Thanks
|
|
#3
08-04-2011, 12:21 AM
|
|||
|
|||
|
Small steps to 17, from there you could use most of the powders intended for the 223 as they are similar in capacity. Benchmark and 4895H, Tac, Varget, are all listed in TK's book of secrets. Adam
|
|
#4
08-04-2011, 03:01 AM
|
|||
|
|||
Sounds like a nice rifle!
How about some pics of it??
Kevin
|
|
#5
08-04-2011, 10:36 AM
|
|||
|
|||
|
As soon as it arrives I will be happy to.
|
|
#6
08-21-2011, 06:36 PM
|
|||
|
|||
|
Got a scope mounted on it. Just waiting on one more bushing to get the cases formed so I can neck turn.
 
|
|
#7
08-22-2011, 12:39 AM
|
|||
|
|||
|
That is a really nice looking rifle. Looking forward to the range report.
Aaron
|
|
#8
08-22-2011, 04:08 AM
|
|||
|
|||
|
Nice pictures!
Neck turning? Does the chamber have a tight neck dimension?
A FL die will serve you well.....prior to turning. Kevin
|
|
#9
08-22-2011, 04:43 PM
|
|||
|
|||
|
Neck Turning
I had to turn mine for the Dreamsicle three times. My chamber is a .194" neck. I had to turn neck thickness down to .009" thickness. My starting loads were 24.5 gr Varget and 25 gr V-Maxes. My chrono would not read bullet velocity.
__________________
"Happiness is a Warm Gun!"
|
|
#10
08-22-2011, 09:55 PM
|
|||
|
|||
|
must neck turn 17ppc
i turned mine at the 20 cal. stage as they were so thick they would not go into my 17ppc fl die , i then cleaned em up after fire forming,my neck is .197. you guys are giving me the fever for the flavor of bat rifles, those are nice.
|
 |
|
|
Linear Mode
