#21
|
|||
|
|||
UPDATE: I called Hornady and talked with their tech service. The tech suggested turning the die into the press an additional amount. He said don't go beyond 1/2 turn past the die touching the shell holder. As trapperdan suggested in an earlier reply that is what worked. The tech said there could be some play in the press, die, shell holder which may be causing a problem. I went almost a 1/4 turn and now the brass will chamber.
|
#22
|
|||
|
|||
I had that same problem when I first started with the Vartarg. The video below solved my issue.
https://www.youtube.com/watch?v=ldtbsym650k&t=362s |
|
|