|
|
|
| |
|
#2
02-10-2018, 04:58 AM
|
|||
|
|||
14 rod
I have been buying brass rods from EBay and the couplers there as well so you can put any jag, swab, or brush you want on it. I bought them for all my tiny calibers from 10 caliber on up
The couplers you can buy in any thread size then just run a die on the brass rod to fit the coupler. Very, Very easy and its brass. Other than that..... Good Luck! You can have your own for less than 10 Bucks. 
|
|
#3
02-10-2018, 05:21 AM
|
|||
|
|||
|
14 rod
I just looked but im out of that size of rod. I can buy it, make it for you and ship it but it with all the shipping would cost you 3X as much as if you did it yourself. The only trouble you may run into is if the coupler OD is too big but then just use the extra length of rod, die it. Screw the coupler on, chuck it up in a hand drill and sand down the OD of the coupler. Like I said, Its pretty simple and order more than one rod i case you happen to bend a rod. As long as your paying for shipping, thats the thing to do. If you have any questions let me know but I bought all of that right off EBay. I hope this helps.
|
 |
|
|
Linear Mode
