Saubier.com  



Go Back   Saubier.com > Saubier.com Forums > Small Caliber Discussion Board

Reply
 
Thread Tools Display Modes
  #1  
Old 01-27-2022, 03:14 AM
BrianM BrianM is offline
Member
 
Join Date: Sep 2006
Posts: 96
Default Gunsmith reccomend. 22 H to K Hornet ?

I have a Browning 1885 Low Wall in 22 Hornet that I would like to get rechambered to a K Hornet . Any recommendations on a gunsmith for this ? I am in northeastern Ohio if that matters .
Any info or suggestions would be appreciated!
Reply With Quote
  #2  
Old 01-27-2022, 04:02 AM
Bill K Bill K is offline
Senior Member
 
Join Date: Aug 2012
Location: N.E. Kommie Kalifornia
Posts: 6,304
Default

Have you checked with any local gunsmiths in your town/area ?
They may be able to do the job for you.
Or you might contact Pac-nor or Doug Turnbull.
Reply With Quote
  #3  
Old 01-27-2022, 01:15 PM
cmatera cmatera is offline
Supporting Member
 
Join Date: Sep 2008
Location: CO
Posts: 690
Default

Greg Tannel is one of the best, but be prepared to wait for it.
Reply With Quote
  #4  
Old 01-27-2022, 01:35 PM
SmokinJoe SmokinJoe is offline
Supporting Member
 
Join Date: Aug 2010
Location: Augusta, GA
Posts: 982
Default

If Evilio MacDonald in Houston, TX is still working, he has done a bunch of them. I have my own reamer and did the last two myself with barrel in place using a T-handle wrench from PT&G. It isn't a particularly difficult job, just have to pay attention to the basics and don't get too aggressive.
There was another guy from the midwest who used to post on this site a good bit; went into gunsmithing/rifle building several years ago but can't remember his name. Maybe someone else can shed some light on this?
Reply With Quote
  #5  
Old 01-27-2022, 02:06 PM
JohnHenry JohnHenry is offline
Senior Member
 
Join Date: Jan 2008
Location: Northern Delaware
Posts: 514
Default

Quote:
Originally Posted by SmokinJoe View Post
If Evilio MacDonald in Houston, TX is still working, he has done a bunch of them. I have my own reamer and did the last two myself with barrel in place using a T-handle wrench from PT&G. It isn't a particularly difficult job, just have to pay attention to the basics and don't get too aggressive.
There was another guy from the midwest who used to post on this site a good bit; went into gunsmithing/rifle building several years ago but can't remember his name. Maybe someone else can shed some light on this?
May be thinking of member ab bentley from Dresden Ohio. Adam's company was Dresden Gun Co. Ltd.
__________________
John

Last edited by JohnHenry; 01-27-2022 at 02:12 PM.
Reply With Quote
  #6  
Old 01-27-2022, 04:17 PM
jdunham jdunham is offline
Senior Member
 
Join Date: Dec 2006
Location: Upstate NY
Posts: 484
Default

Quote:
Originally Posted by cmatera View Post
Greg Tannel is one of the best, but be prepared to wait for it.
Greg isn’t taking on new work currently per his website.
__________________
NRA Life Member
Reply With Quote
  #7  
Old 01-27-2022, 04:36 PM
Bill K Bill K is offline
Senior Member
 
Join Date: Aug 2012
Location: N.E. Kommie Kalifornia
Posts: 6,304
Default

Quote:
Originally Posted by jdunham View Post
Greg isn’t taking on new work currently per his website.
Did I not read somewhere, that he was retiring and even had his business for sale ? Was going to still do a few things. Or was that another gunsmith ?
Reply With Quote
  #8  
Old 01-27-2022, 04:39 PM
Bob Acker Bob Acker is offline
Senior Member
 
Join Date: Dec 2006
Location: So Cal
Posts: 233
Default

Check with Dennis Olson in Plains Montana.
Haven’t used him recently but at the time his prices were reasonable and turn around very good.
Bob
Reply With Quote
  #9  
Old 01-27-2022, 04:45 PM
tim simbari tim simbari is offline
Senior Member
 
Join Date: Sep 2006
Posts: 293
Default

Go with Evilio, very good and close to you.
Reply With Quote
  #10  
Old 01-27-2022, 08:53 PM
256wm 256wm is offline
Senior Member
 
Join Date: Oct 2006
Location: Wisconsin
Posts: 246
Default

Kevin Weaver does first rate work.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 12:57 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.