Saubier.com  



Go Back   Saubier.com > Saubier.com Forums > Small Caliber Discussion Board

Reply
 
Thread Tools Display Modes
  #1  
Old 02-08-2015, 08:36 PM
Nelson Nelson is offline
Senior Member
 
Join Date: Sep 2006
Location: Kentucky
Posts: 165
Default Hornady LNL Bushings

Do any of you use the Hornady LNL bushings either in the Hornady press or in the RCBS Rockchucker? Just wondering if they are consistent when you change dies and come back. Have they affected accuracy negatively? I have a Old RCBS press and looking to add a New press to the bench and trying to decide what to buy. I am a low count reloader compared to most here. Work seems to be picking up more over the last couple years and I don't get to shoot as much as I would like. Just wanted to get a few opinions before placing my order.

Thanks, Nelson
Reply With Quote
  #2  
Old 02-09-2015, 01:40 AM
GLWenzl GLWenzl is offline
Supporting Member
 
Join Date: Sep 2006
Posts: 5,641
Default

they have worked very well for me. Once set I have never had to readjust. And talk about quick to swap out dies.

Down side is that I having to purchase over 90 bushings for all the dies.
__________________
Shoot First... Ask questions later... On Saubier.com
__________________
NRA Lifetime Endowment Member
Reply With Quote
  #3  
Old 02-09-2015, 02:35 AM
Nelson Nelson is offline
Senior Member
 
Join Date: Sep 2006
Location: Kentucky
Posts: 165
Default

Quote:
Originally Posted by GLWenzl View Post
they have worked very well for me. Once set I have never had to readjust. And talk about quick to swap out dies.

Down side is that I having to purchase over 90 bushings for all the dies.

Thanks,

That is what I was hoping to hear, I am just trying to speed up the reloading some so maybe I can get time to pull the trigger every once in a while.

Nelson
Reply With Quote
  #4  
Old 02-10-2015, 12:12 AM
GLWenzl GLWenzl is offline
Supporting Member
 
Join Date: Sep 2006
Posts: 5,641
Default

I hear that... My L&L Hornady press has bailed me out more than once getting ready for a PD hunt like then othe before... Ray was always amazed!
__________________
Shoot First... Ask questions later... On Saubier.com
__________________
NRA Lifetime Endowment Member
Reply With Quote
  #5  
Old 02-10-2015, 08:19 PM
Reddirt204 Reddirt204 is offline
Member
 
Join Date: Sep 2011
Location: Northwest, Western Australia
Posts: 40
Default

Nelson, I run the same set up,LnL & a Rock Chuck

I mainly use the RC for full length sizing some of my bigger brass (308 etc) but just about everything else is done on the LnL. I use one of the thread adapters on the RC loctited to the same height as my Hornady so I don't have to change settings on my dies if I change presses. If you get a couple of the quick change powder bushings(?) for the Hornady thrower it makes life very easy to change between cals, I used to load 22 hornet,204,223,243,308,9mm,38sp and 357mag on the two presses, you can really crank out some good ammo when they are set up as well

Cheers

Reddirt204
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:28 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.