#11
|
|||
|
|||
Send me a text with how much you want and payment arrangements. At this point I’m not nearly as bad of shape as I was a few days ago. Thank you very much.
__________________
Shoot First... Ask questions later... On Saubier.com __________________ NRA Lifetime Endowment Member |
#12
|
|||
|
|||
Quote:
Do you have a scope on your 65? I’m using a William’s peep sight with what I think is a custom made dovetail blank for the rear sight (came as part of the deal with the original rear sight). I am very pleased with it but not as pleased as using glass lol Today I worked up some CFE loads running the 45 Hornady’s right at 3,000 FPS... Yesterday loaded up some with old data 2200 running 2800 FPS with what I believe is still a light load with room to go. I suspect close to 3k with them as well. Haven’t shot any for accuracy yet just pressure. I decided to crimp into the canalure this time. In the past I worked up the load with the bullet into the lands a little bit on a Ruger #1. Also found out but using the LFC die that the brass I made from starline 32-20 must be a little thinner. Noticed it barely felt like I was crimping after doing the winchester brass
__________________
Shoot First... Ask questions later... On Saubier.com __________________ NRA Lifetime Endowment Member |
#13
|
|||
|
|||
Eric, you saved the day... except I did over spend again lol I found some winchester 46 gr bullets at around $11 something @100 then after stocking up on that order you posted the link at midsouth! I could of sworn I looked on their web site last week and it was not available??? Regardless it got me backup to what I feel is a fate zone for a while.
appreciate it very much Eric and a text will be on the way!
__________________
Shoot First... Ask questions later... On Saubier.com __________________ NRA Lifetime Endowment Member |
#14
|
|||
|
|||
Quote:
__________________
Shoot First... Ask questions later... On Saubier.com __________________ NRA Lifetime Endowment Member |
#15
|
|||
|
|||
Tried to send you a PM but kicked back due to no room in your inbox.
|
#16
|
|||
|
|||
No glass it wears an off center mounted Marbles tang sight, it's a used rifle and whoever mounted the sight missed a bit. I load this one on a Dillon and just use RCBS dies with a Lee (light) crimp die. Powder is 1680 as I have quite a bit on hand for the 17 Hornet, it's running about 2650fps. At about 80 yards the front sight starts to cover a gopher which can make longer shots interesting. And I'm also using reformed 32-20 Starline brass.
|
#17
|
|||
|
|||
Sweet! Sounds like a really nice rug!!! I was surprised how much heavier that light lil 65 is after it’s fully loaded lol
I forgot to say earlier that I’m also experimenting with TCM bullets 45 grain and they have the cannelure. On that same note, I’m also playing with those same TCM bullets in the 22 Jet and giving it a pretty good grip... I won’t know for a few days if it helps the accuracy anymore as it did for me with crimping the 22 Hornet?
__________________
Shoot First... Ask questions later... On Saubier.com __________________ NRA Lifetime Endowment Member |
#18
|
|||
|
|||
Need you to make some room in your inbox tried to send a PM but the box is full.
|
Thread Tools | |
Display Modes | |
|
|