Custom Barrels in 17 Ackley Hornet and 357 Max.

[DAVID]

All barrels are built by barrel stubbing, and all barrel stubs used were from factory rifle barrels.

Since barrels are not factory contoured, nor are factory forends available for them, they are NOT drilled and tapped for a forend. Custom forends can be made or ordered from custom shops, and the barrels can then be drilled and tapped for a very precise fit of the forend. If you are going to build your own forend, then I'll go ahead and drill and tap the barrel for you.

Barrels must also be drilled/tapped for a scope base.

T/C Contender / G2 barrels -

#1 - Blue barrel stub with a stainless barrel. Barrel is .850" diameter with no taper. Chambered in 357 Maximum with a 1-14" twist rate. Barrel length is 18" and can be cut and crowned at any length requested. $350 shipped Priority Mail.

#2 Blue barrel stub with a stainless barrel. Barrel diameter in front of the stub is .855 and tapers down to .655 at the muzzle. Chambered in 357 Maximum with a 1-14" twist rate. Barrel length is 23" and can be cut and crowned at any length requested. $325 shipped Priority Mail.

#3 Blued barrel stub with a stainless bull barrel. Barrel diameter is 1.200" straight tube. Chambered in 17 Ackley Hornet with a 1-10" twist rate. Barrel length is 21" and can be cut and crowned to any length requested. $425 shipped Priority Mail.

T/C Encore barrels -

#4 - Stainless barrel stub with a stainless barrel. Diameter in front of the stub and at the muzzle is 1.200". Chambered in 357 Maximum with a 1-14" twist rate. Maximum barrel length is 26", but can be cut to any length requested. Scope base installed. $450 shipped Priority Mail.

#5 Identical to the #3 barrel, except chambered in 17 Ackley Hornet with a 1-10" twist rate. Scope base installed. $450 shipped Priority Mail.


Here are a couple of pictures with barrel stubbed barrels -











Send me a PM with any questions.