|
#1
|
|||
|
|||
Curious about load data questions
Just wondering why I see so many questions, from post's, asking for load data on this cartridge or that cartridge more these days.
Does not anyone have reloading manuals ? There are so many out there now days, from almost every maker of the bullets we use, plus one's from the powder producers. So I guess I wonder why not obtain one or two, read and start loading with their suggestions ? Anyone have thoughts on this ? Maybe I am just thinking too many are to lazy to work up a load and just want someone to tell them what to use. Right or Wrong ? Bill K |
#2
|
|||
|
|||
Quote:
In a lot of cases it simply seems like the person asking the question is new to reloading, does not own a reloading manual, and is happy with what someone else suggests without realizing that somone's "perfectly safe load" might not be so safe in their rifle. In my internet experience I've made it a practice to never give out specific loads, etc. as I have no way of knowing what the next guy might do with them. I will recommend certain powders, bullets, etc. that have worked for me for different cartridges, but nothing more specific than that. I guess all of us older guys learned to reload from a manual without the benefit of the internet to do the leg work for us. I for one am glad that I learned that way. JMO - BCB
__________________
I miss mean Tweets, competence, and $1.79 per gallon gasoline. Yo no creo en santos que orinan. Women and cats will do as they please. Men and dogs should relax and just get used to the idea. Going keyboard postal over something that you read on the internet is like seeing a pile of dog crap on the sidewalk and choosing to step in it rather than stepping around it. If You're Afraid To Offend, You Can't Be Honest - Thomas Paine |
#3
|
|||
|
|||
I have at least one or more manuals from each bullet and powder manufacture as well as tool makers manuals some are near as old as me, it really helps when you have some old or outlandish wild cat to figure out where to start, if you READ you can extrapolate a lot of knowledge and come up with a safe and reasonable starting point, Or just ask and hopefully one of us will dumb up and help
|
#4
|
|||
|
|||
I also agree. Laziness must be a big factor, especially if it is a pretty standard caliber and powder or bullet. If someone is new to a caliber or a maybe even if a wildcat cartridge, the first step should be to research loading manuals or websites to learn as much as you can, then ask on the board if you need something more. You need to do the load development work to get the best possible results.
|
#5
|
|||
|
|||
Load Data
I s'pose to some extent laziness may be a factor, but even now I use the search feature on Saubier to attempt to glean info that might save me some bullets, time, powder, and putzing with something that may or may not work. The search feature and helpful nature of our members helped me a ton with .17AH, .20/222, .17 Fireball and others over time.
|
#6
|
|||
|
|||
I am glad I am not the only one that thought that way.
I will ask about what powders and bullets guys have had luck with when I start on a new project. There are a lot of keyboard snipers and sharp shooters. I see and have seen first hand those that want instant success. Reality TV has had a big influence on this. I have seen quit a bunch of "younger" people spend a fair chunk of change on things, then go to use them and they find out it may be tougher than they thought. Then they give up. |
Thread Tools | |
Display Modes | |
|
|