|
#1
|
|||
|
|||
Cz 527 25-20
Considering a 25-20 on a CZ. This shouldn’t be much different than my 218bee/527 build should it?
Any help is appreciated
__________________
Shoot First... Ask questions later... On Saubier.com __________________ NRA Lifetime Endowment Member |
#2
|
|||
|
|||
I have thought that a 25-20 would be good in a bolt action. My 25-20 is a heavy barrel G2 Contender. A friend had a Kimber of Oregon in 25-20, too rich for my budget. I have some 527s, hadn't thought of converting one. What 527 was the basis for the Bee conversion? Was it difficult and or expensive? I will be following this thread!
Bill |
#3
|
|||
|
|||
Had similar thoughts Gary but I was thinking of the 256 win mag
Johno |
#4
|
|||
|
|||
Gary, not a big deal if you have a good gunsmith. Eddie opened up Hornet actions for my 218 and 25-20. And no it doesn't feed from the magazine.
|
#5
|
|||
|
|||
Well it looks like I better start looking for a donor 527... or at least a barrel and make the killer bee a switch barrel.
I opened up my own bolt face but don’t have access to the equipment any longer. I was also thinking about having Bullberry make me a barrel to maybe ease the ‘wants’ a little bit.. Thanks
__________________
Shoot First... Ask questions later... On Saubier.com __________________ NRA Lifetime Endowment Member |
#6
|
|||
|
|||
Just another thought Gary and one that would probably feed from the magazine, its been discussed before but what about a 25 cal on a 221 fireball case, I know the lack of lightweight bullets is a pain but as your going to be using 25-20 style bullets 60 grn or similar it might work well
Johno |
Thread Tools | |
Display Modes | |
|
|