#1
|
|||
|
|||
17 Garin Things
Timing is everything - Right after the previous Garin/SureStrike thread. I bought back my 17 AH project I sold a few years ago so this is not going to be used. I have the Hornady form die, Hornady fl 2 die set, the expander mandrel , and the reamer that I recently purchased that had been used once. The dies and the expander mandrel are unused. This could be used with Calhoon 19 Badger brass with no other forming dies necessary, you still will need to turn necks. looking for 275 shipped. First "I'll take it" gets it, and listed here first, will be listing other places Friday.
Last edited by drewh; 03-10-2021 at 10:48 PM. |
#2
|
|||
|
|||
Do you have the reamer print you could send me? What other dies would be
needed to form from 30 carbine? |
Thread Tools | |
Display Modes | |
|
|