Saubier.com  



Go Back   Saubier.com > Saubier.com Forums > Small Caliber Load Data

Reply
 
Thread Tools Display Modes
  #11  
Old 11-02-2019, 04:22 PM
Rustydust Rustydust is offline
Junior Member
 
Join Date: Dec 2011
Location: Southwest Idaho
Posts: 18
Default

Quote:
Originally Posted by Gary in Illinois View Post
You might contact BadgerBob on this forum. I think he offers a 17 caliber 30 grain bullet.

Good luck
Thanks. I sent him a PM.
Reply With Quote
  #12  
Old 11-03-2019, 01:51 AM
borkon borkon is offline
Senior Member
 
Join Date: May 2009
Location: western Mn
Posts: 319
Default

Did Chan quit making bullets?
If so, that's horrible news. I got 3 boxes left.
Reply With Quote
  #13  
Old 11-04-2019, 11:25 AM
Russell Russell is offline
Senior Member
 
Join Date: Jan 2009
Location: SW Michigan
Posts: 218
Default 30 grain bullets in .17 Remington

I have shot this load in two Remington 700 .17REM rifles with amazing results with temps(F) in the 80's and low 90's.

30-grain Woodchuck Den Bullets

IMR4007SSC 26.0 Grains / Primer: CCI-450 ( 3660 fps ) No signs of pressure problems. 5-shot groups in both factory barrels at 3/8" or better.
Reply With Quote
  #14  
Old 11-05-2019, 04:37 PM
Rustydust Rustydust is offline
Junior Member
 
Join Date: Dec 2011
Location: Southwest Idaho
Posts: 18
Default

Quote:
Originally Posted by Hog Patrol View Post
I bought 30s from Chan Nagel a few years ago. I don't know if he's still making them.
I talked to Chan yesterday. A good 45 minute call it was too and I must say he sure came across as a nice guy.

Anyway he is shipping me 2 boxes of his 30 grain .172" bullets today. I sure hope that I have as good of results as others have. I have some Big Plans for them come springtime making some orphan rock chucks. Here's hoping.
Reply With Quote
  #15  
Old 11-11-2019, 01:58 PM
coyotespotter coyotespotter is offline
Senior Member
 
Join Date: Aug 2014
Posts: 175
Default

I can shoot 29 gr WCD and 29 gr bullets from Badger bob with same load with no poi difference. 26.7 H414 is mid 3900 s with 26" Lilja barrel. Bob's bullets have a slightly more open tip, and are hammers on coyote. I have not tried Chan's, mostly because I have enough bullets to shoot out a barrel plus.
Reply With Quote
  #16  
Old 11-18-2019, 06:12 AM
gjn11 gjn11 is offline
Junior Member
 
Join Date: Sep 2008
Posts: 18
Default 17

Russell,

Donít know if you are aware but Hodgdon has recalled all lots of IMR-4007 SSC due to deterioration. If you contact them they will replace it with any other IMR powder.
Reply With Quote
  #17  
Old 11-30-2019, 10:29 PM
Acronin243 Acronin243 is offline
Junior Member
 
Join Date: May 2018
Posts: 26
Default 32gr Reeds RBBT bullets

It took me a while but I found a really nice load with CFE223 and Reed 32gr rebated base boat tails. They are zipping along at 3650fps and flatten coyotes. It's a soft point bullet and holds together well. It actually had a substantial exit on one small coyote I shot through the shoulders. But it's a nice bullet that shoots well from my CZ527 Varmint.
Reply With Quote
  #18  
Old 12-01-2019, 03:36 AM
17tbs 17tbs is offline
Senior Member
 
Join Date: Oct 2007
Posts: 521
Default 32gr Reed 17 SPRBT

Hey, which 32gr softpoint is it that you are referring to, the really blunt tipped one, or ones with a sharper metplat?

Last edited by 17tbs; 12-01-2019 at 11:45 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:15 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.