Saubier.com  



Go Back   Saubier.com > Saubier.com Forums > Small Caliber Discussion Board

Reply
 
Thread Tools Display Modes
  #1  
Old 05-27-2014, 03:01 AM
MFG_BOP MFG_BOP is offline
Junior Member
 
Join Date: Dec 2013
Location: New Zealand
Posts: 20
Default Annealing 221 / 20VT brass

Hello all. How long do you guys anneal those cases for? I ask that cos its a short case and I am afraid of end up annealing the case heads. I dont want to use Tempilaq, just a short answer form you is sufficient.
Cheers
Reply With Quote
  #2  
Old 05-27-2014, 03:23 AM
Bill K Bill K is online now
Senior Member
 
Join Date: Aug 2012
Location: N.E. Commie Kalifornia
Posts: 5,824
Default Annealing 221/20VT

I go for a count of four. (one thousand one, etc.) works for me. Bill K
Reply With Quote
  #3  
Old 05-27-2014, 12:06 PM
ab_bentley ab_bentley is offline
Supporting Member
 
Join Date: Sep 2008
Location: Rambler
Posts: 6,910
Default

Max flame on the blue cone, in a hand drill slow speed, about six seconds.

Adam
Reply With Quote
  #4  
Old 05-27-2014, 12:15 PM
Old Hawkeye Old Hawkeye is offline
Senior Member
 
Join Date: Oct 2011
Location: Iowa
Posts: 880
Default

Depends on your flame temperature. The hotter the flame & the quicker the brass gets to temp the better. I don't time it. I do it in a nearly dark room & heat to the instant I see a slight orange in the neck.
Reply With Quote
  #5  
Old 05-27-2014, 12:43 PM
ab_bentley ab_bentley is offline
Supporting Member
 
Join Date: Sep 2008
Location: Rambler
Posts: 6,910
Default

Quote:
Originally Posted by Old Hawkeye View Post
Depends on your flame temperature. The hotter the flame & the quicker the brass gets to temp the better. I don't time it. I do it in a nearly dark room & heat to the instant I see a slight orange in the neck.
Also it depends on turning speed, if you run the drill as fast as it can go it'll take longer. Old Hawkeyes method is the one I stick to, but after a few ten thousand cases the little VarTarg won't take more than seven seconds when using the method I stated. The main thing, as soon as you see the color change pull it. No need for water bath unless it makes you more comfortable.

Adam
Reply With Quote
  #6  
Old 05-27-2014, 08:10 PM
Nor Cal Mikie Nor Cal Mikie is offline
Supporting Member
 
Join Date: Jul 2010
Location: 125 miles North of San Francisco.
Posts: 1,073
Default

One thing I've done is switched to "Map Gas". Hotter flame and less time needed to bring the brass up to temp. Less chance of the heat traveling down to the case head. Maybe a 4 or five count usually gets the job done.
I use a rechargable drill motor and slow speed and a deep socket stuffed with steel wool to keep the brass at the level I'am after. No water dump after. Just don't be in a hurry to pick up the cases.

Last edited by Nor Cal Mikie; 05-29-2014 at 11:19 AM.
Reply With Quote
  #7  
Old 05-27-2014, 09:03 PM
charlesasmith charlesasmith is offline
Senior Member
 
Join Date: Jun 2008
Location: Oregon
Posts: 249
Default MAP gas burners?

What type of flame "heads" do you use. Had a terrible time with mine using propane.

BTW lived for a short time in Sebastopol about half way to where you are.

Chuck
Reply With Quote
Reply

Tags
20vt, annealing, benchrest, fireball, vartarg

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:47 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.