Saubier.com  



Go Back   Saubier.com > Other Forums and Resources > Classifieds

Reply
 
Thread Tools Display Modes
  #1  
Old 06-08-2017, 11:43 PM
clipperbill clipperbill is offline
Member
 
Join Date: Oct 2007
Location: woodland, ca
Posts: 37
Default Wanted - L461 Sako Extractor

Mine broke off so that gun is dead in the water!

I need the one that is about 1.375" long.

The rear 1/2" portion is about 3/32" wide and front is about 1/8" wide.

If anyone has a spare one, please call me at 530 908 6963.

Thank you,

Bill
Reply With Quote
  #2  
Old 03-31-2018, 12:23 AM
hunterpa hunterpa is offline
Junior Member
 
Join Date: Oct 2010
Location: Pennsylvania
Posts: 4
Default Extractor

Bill did you ever find the Long Extractor 1.5" for your SAKO L461 if not give me a shout. I have a few spare parts for the L461.
Reply With Quote
  #3  
Old 03-31-2018, 10:48 PM
Hal Hal is offline
Senior Member
 
Join Date: Feb 2011
Location: Montana
Posts: 492
Default

Hunterpa

It's nice to know there are a few parts around.

Ha
Reply With Quote
  #4  
Old 05-11-2018, 01:49 AM
Hal Hal is offline
Senior Member
 
Join Date: Feb 2011
Location: Montana
Posts: 492
Default

Do you have any bolt stop springs for the early 461 Sako actions ?
If so how much?

Hal
Reply With Quote
  #5  
Old 05-11-2018, 07:11 AM
Foxhunter223 Foxhunter223 is offline
Senior Member
 
Join Date: May 2007
Location: Coffs Harbour, Australia
Posts: 559
Default

Hal I made my own bolt stop spring when it broke. If your having trouble making one just get in touch with your local piano tuner and they will show you how to make one.

Here's one I prepared earlier:


Pete
__________________
Whatever is not nailed down is mine. What I can pry loose is not nailed down.
Reply With Quote
  #6  
Old 05-11-2018, 01:52 PM
Hal Hal is offline
Senior Member
 
Join Date: Feb 2011
Location: Montana
Posts: 492
Default

Pete

Thanks for the reply, that looks easy enough to make, if I can find some wire.

Hal
Reply With Quote
  #7  
Old 05-12-2018, 06:10 AM
Foxhunter223 Foxhunter223 is offline
Senior Member
 
Join Date: May 2007
Location: Coffs Harbour, Australia
Posts: 559
Default

Hal that is made from Piano wire and is very strong. I made a frame to wrap it around by driving nails into a block of wood then shaping the wire around the nails. This was several years ago now and I think it took me two tries to get the nails in the right position. But as I said was not difficult once I had my template. I went and looked through my gun room last night and could not find my template so can only assume I have misplaced it when we moved. I was going to make you one as I still have about 30 centimetres of the wire I used.

Just remembered that I borrowed a spring from a friend who had a factory one and that I what I made my template from.

Pete
__________________
Whatever is not nailed down is mine. What I can pry loose is not nailed down.

Last edited by Foxhunter223; 05-12-2018 at 06:14 AM. Reason: To add how I made template.
Reply With Quote
  #8  
Old 05-20-2018, 11:52 AM
Foxhunter223 Foxhunter223 is offline
Senior Member
 
Join Date: May 2007
Location: Coffs Harbour, Australia
Posts: 559
Default

Hal,
I have searched my gun room and cannot find the template I had, so I have made one by hand. It is rough but it works so if you need it PM me a postal address and I will send it. As I said it is a bit rough and ready but should tide you over till you can find a factory spring.
Pete
__________________
Whatever is not nailed down is mine. What I can pry loose is not nailed down.
Reply With Quote
  #9  
Old 05-20-2018, 08:02 PM
Hal Hal is offline
Senior Member
 
Join Date: Feb 2011
Location: Montana
Posts: 492
Default

Foxhunter

I sent you a pm.

Hal
Reply With Quote
Reply

Tags
qqq

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 08:33 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.