#11
|
|||
|
|||
Thanks. I sent him a PM.
|
#12
|
|||
|
|||
Did Chan quit making bullets?
If so, that's horrible news. I got 3 boxes left. |
#13
|
|||
|
|||
30 grain bullets in .17 Remington
I have shot this load in two Remington 700 .17REM rifles with amazing results with temps(F) in the 80's and low 90's.
30-grain Woodchuck Den Bullets IMR4007SSC 26.0 Grains / Primer: CCI-450 ( 3660 fps ) No signs of pressure problems. 5-shot groups in both factory barrels at 3/8" or better. |
#14
|
|||
|
|||
Quote:
Anyway he is shipping me 2 boxes of his 30 grain .172" bullets today. I sure hope that I have as good of results as others have. I have some Big Plans for them come springtime making some orphan rock chucks. Here's hoping. |
#15
|
|||
|
|||
I can shoot 29 gr WCD and 29 gr bullets from Badger bob with same load with no poi difference. 26.7 H414 is mid 3900 s with 26" Lilja barrel. Bob's bullets have a slightly more open tip, and are hammers on coyote. I have not tried Chan's, mostly because I have enough bullets to shoot out a barrel plus.
|
#16
|
|||
|
|||
17
Russell,
Don’t know if you are aware but Hodgdon has recalled all lots of IMR-4007 SSC due to deterioration. If you contact them they will replace it with any other IMR powder. |
#17
|
|||
|
|||
32gr Reeds RBBT bullets
It took me a while but I found a really nice load with CFE223 and Reed 32gr rebated base boat tails. They are zipping along at 3650fps and flatten coyotes. It's a soft point bullet and holds together well. It actually had a substantial exit on one small coyote I shot through the shoulders. But it's a nice bullet that shoots well from my CZ527 Varmint.
|
#18
|
|||
|
|||
32gr Reed 17 SPRBT
Hey, which 32gr softpoint is it that you are referring to, the really blunt tipped one, or ones with a sharper metplat?
Last edited by 17tbs; 12-01-2019 at 10:45 PM. |
|
|