#11
|
|||
|
|||
I vote for a .20 practical. Cheap brass, good selection of bullets, easy to tune and shoots well with most every bullet.
|
#12
|
|||
|
|||
I thought of that one also, but I have around 1000 cases of 204 brass.
|
#13
|
|||
|
|||
What twist are you going with? I like the 1@10 twist.
|
#14
|
|||
|
|||
I went with the 9 twist 3 groove.
|
#15
|
|||
|
|||
After thinking about it I called Lilja back and changed it to a 11 twist. It will be a lightweight rifle shooting 32's to 39's with maybe an occasional 40gr. , I really don't need a 9T.
Would that fast of a twist in a 204 shooting 35's slow the velocity down much? |
#16
|
|||
|
|||
Don't believe the FPS would vary much, but I don't believe you would get the accuracy with 1/9 that you will with the 1/11.
|
#17
|
|||
|
|||
I just read an article on the twist slowing velocity down. Not enough to argue over.
When my factory barrel quits, a new one will be ordered with a 1-9” twist. Yes Sierra 39’s show they will fly well in the 11’s, but I tend to find good deals on 40 grain v Max’s and Berger’s. |
#18
|
|||
|
|||
I saw on another forum that you hadn't found a donor. Did one come though for you?
A 1-11" twist barrel will serve you well. It will probably not be any more accurate than a 1-9" twist barrel would be with a good bullet, but the 11" twist will put a bit less stress on a 20 caliber bullet while in the barrel and hence it will probably provide a bit better barrel life. -BCB
__________________
I miss mean Tweets, competence, and $1.79 per gallon gasoline. Yo no creo en santos que orinan. Women and cats will do as they please. Men and dogs should relax and just get used to the idea. Going keyboard postal over something that you read on the internet is like seeing a pile of dog crap on the sidewalk and choosing to step in it rather than stepping around it. If You're Afraid To Offend, You Can't Be Honest - Thomas Paine |
#19
|
|||
|
|||
Quote:
I jumped to soon and didn't do enough research on twist with the 204. You would think after all these years I would learn to be more patient, but........ Thankfully the members on this forum are a wealth of information, freat advice, and experience. I now see where a 9 twist while not necessary would have been just fine, but I'm glad I switched back to a 11 twist. Reading posts on some other websites from BCB, Bill K, and others convinced me that what I really needed was the 11 twist. Thanks fella's for the advice. |
#20
|
|||
|
|||
K22: One thing to take note of is with the 1/11 twist when you go into the 39 & 40 grain bullets. For whatever reason, most of us have found good accuracy and results will be with the 39 grain bullet.
Often the use of a 40 grain just does not work as well. They just don't seem to stabilize as well. But any critter you are after can't tell a hill of beans with the one grain difference, with one grain less and the use of the 39 grainers. Bill K |
Thread Tools | |
Display Modes | |
|
|