#1
|
|||
|
|||
Howa mini 223 BARREL WRENCH
I have a new Howa Mini 223 that I would like to put a remage barrel on. I need an action wrench. I have read that a Rem. 700 wrench will work. I measured the Mini receiver at 1.172. Isn't the 700 1.355?
Last edited by 358SCOTT; 06-28-2020 at 10:29 AM. |
#2
|
|||
|
|||
Where did you read that? I don't see how a r700 wrench would work on a mini.
The mini has an integrated recoil lug. I use a big crescent wrench with scraps of soft aluminum. The mini barrels are not too hard to get off. The regular howa 1500 barrels are RFT. |
Thread Tools | |
Display Modes | |
|
|