|
#1
|
|||
|
|||
.14 cal gr. bullet
I need some 15 gr. bullets plus or minus, that measure .144 at the pressure ring and have a .1435 body diameter. Please contact me if you have any you want to part with.
Thanks, John |
#2
|
|||
|
|||
14 caliber bullets
In order to get the exact bullets I wanted bought bullet making press and dies. Have dies for several different bullet calibers, shape points, weights etc and multiple bullet presses. Made swagged and turned bullets over the years .10 caliber to shotgun slugs. Even though I have the ability to make my own seldom do. It is easier to buy them from bullet makers that do it to make a profit. From your past post you were not satisfied with what is available. Making your own allows you to order dies to make exactly the bullet you want.
|
#3
|
|||
|
|||
Unless availability has changed dramatically since I investigated you need to be prepared for a LOOONG wait for the dies.
__________________
Good shooting! Gary NRA Endowment Life Member |
#4
|
|||
|
|||
The wait for dies etc
The wait now is usually longer than it was several years ago. Doubtful it will get shorter, as the die makers get older will probably be longer. The list of die makers is not growing with an abundance of new people anxious to get in the business. I have made some of my equipment, not a quick, easy task but cut wait time. Bottom line is the wait starts after you order, not while waiting to decide or for someone else to step up and get in business. Most that are making the subcaliber bullets they shoot have no desire to go into business making to sell. The number of steps involved in making a quality 14 caliber bullet is why I usually buy instead of making my own. The number of people making them to sell is very limited. Making your own is one of the few options available especially if you are not satisfied with what is available
|
#5
|
|||
|
|||
Why not just design one you like in copper, and have them made in a bulk order on a CNC machine by a company that already makes small caliber CNC bullets. I can think of three companies that have produced .172" turned projectiles.
If you want something in a standard cup and core design you are probably going to be stuck with what ever is left over from those that have already been made. What twist do you have, what is the case capacity? If you are really interested in .14 caliber you might want to read this: https://apps.dtic.mil/sti/pdfs/AD0331651.pdf Last edited by 17tbs; 09-24-2020 at 04:03 PM. |
#6
|
|||
|
|||
14 Caliber 15.0 Gr
John, how many are you looking for?
Carl C. Extreme Accuracy |
Thread Tools | |
Display Modes | |
|
|