#21
|
|||
|
|||
The barrel is now finished!
|
#22
|
|||
|
|||
Bedding the single shot follower in place...
This follower puts the cartridge in alignment with the chamber, so all you have to do is place a round on it, push the bolt forward, and it feeds the cartridge straight into the chamber... |
#23
|
|||
|
|||
David I use that follower trimmed to fit in a SA. I taper the front so it over laps on the actions feed ramp. I JB around the front and part way back to keep solvent out. I can lay a short case anywhere along the follower and it feeds like it has eyes.
|
#24
|
|||
|
|||
Ray,
I completely bedded this to the action, and around the top and sides of the follower. There is no gap anywhere around it... |
#25
|
|||
|
|||
Got the pillars made this morning, and getting ready to glue them in place...
Tomorrow I will screw the barrel back into the action, and bed the action to the stock... Last edited by DAVID; 04-12-2018 at 01:32 PM. |
#26
|
|||
|
|||
|
#27
|
|||
|
|||
|
#28
|
|||
|
|||
Okay guys, any one interested in a custom rifle, rebarrel, rechamber, muzzle brake, barrel threading, muzzle crowning, etc., send me an email... David White - Precision Riflesmith LLC email: precisionriflesmith@gmail.com text: (918) 576-3217 ... Last edited by DAVID; 04-16-2018 at 12:14 AM. |
Thread Tools | |
Display Modes | |
|
|