|
#1
|
|||
|
|||
Primers 17 hornet
I use sm pistol primers in my 22h rifles.
I’m asuming that sm pistol primers are a no go in the 17h as the pressures are 20,000 psi or so higher in the 17h. What say? |
#2
|
|||
|
|||
I use small rifle primers and they work just fine. After all it is a small rifle cartridge. Bill K
|
#3
|
|||
|
|||
Primers
Any secret loads in your 17 hornet?
|
#4
|
|||
|
|||
so far working in the area near top for loads shown in Hornady's Data site with CFE BLK, but am working up some loads with 1680..
did work with some Lil gun, but just had issues with pressure spikes. I think, for me anyway 1680 is going to be the one this rifle likes CZ 527 American, with the 15.5 NTX bullet. ( since I am in Commie California) Bill K |
#5
|
|||
|
|||
I use CCI 450's with Vihtavouri N 120. I can't find any logical reason NOT to use a thick cup primer on a centerfire 17. To each their own.....
Aaron
__________________
I have come to the conclusion that guns are a lot like women, no matter how ugly they are, someone will always take them home!! |
#6
|
|||
|
|||
Rem 7 1/2 Primer, 12.2gr 1680, 20gr Vmax in my two CZ 527 Varmint 17 Hornets works very well.
I have a friend that loads the 20gr Vmax with 12.4gr Hodgdon CFE BLK and that is working really well for him. |
#7
|
|||
|
|||
7 1/2 Rems, A1680 at 3650. I don't remember exact weight, but it's a little below max book load with 20 grain Vmax. I am going to try CFE BLK with 20's and A2200 with the 25's.
|
#8
|
|||
|
|||
Thousands of 17AH at 12.2 1680 with 20gr Vmax and Winchester Small Rifle Primer. Only time I weigh the loads is when I get started just to see if my Harrells hasn't been messed with. Use Wilson neck die and brass will last a long long time.
__________________
A 9mm may expand but a .45 doesn't shrink |
Thread Tools | |
Display Modes | |
|
|