#1
|
|||
|
|||
Rock Creek 20 PPC barrel for BAT VR
Rock Creek barrel #4 contour 12 twist chambered in 20 PPC with .224 neck. Threaded for BAT VR 75 ronds fired. $250 shipped
|
#2
|
|||
|
|||
$200 shipped
|
#3
|
|||
|
|||
What's the overall length and what is the diameter of the tennon? And would like to know the length of the shank. Thanks
|
#4
|
|||
|
|||
Barrel length is 24 inches and it is for a 1.35 BAT VR action barrel tennon is 1.062x18tpi
Last edited by DRS; 11-25-2016 at 05:32 PM. |
#5
|
|||
|
|||
What's the shank length?
|
#6
|
|||
|
|||
I just saw that rock Creek has two #4's. Is it the sporter or target? |
#7
|
|||
|
|||
It is a sporter contour
|
#8
|
|||
|
|||
One last thing I'd like to find out, what is the length of the shank? The part that said 1.2" in diameter.
|
#9
|
|||
|
|||
From where the barrel contacts the face of the action to where it starts to taper down is about an inch.
|
#10
|
|||
|
|||
Ok, thank you. That's what I needed to know. I'll have to pass. I need a longer shank if I want to cut off the threads and rechamber. Thanks again.
|
Thread Tools | |
Display Modes | |
|
|