barrel polish

[dogdown]

need a ss barrel polished, who can do it?

[jwv2001]

You can do it yourself. Depending on the finish you want to end up with. Buy some 200 grit sandpaper and go to work. Move to finer and finer grits until you are where you want to be. It just takes time.

[Hog Patrol]

320 is what most aftermarket barrel makers use but if you want to attain a mirror finish, work up to finer grits and then use rouge on a buffing wheel.

[dogdown]

It's a new Cooper and that would involve me breaking the barrel loose from the action and then polishing. I would rather hire a professional for professional results.

[dogdown]

Where is Bob Green from? Also considering cerokote.

[dogdown]

Ok, I will do some checking, thanks.

[Bill K]

Originally Posted by dogdown

Where is Bob Green from? Also considering cerokote.

Bob Green, York, PA very good gunsmith. He did a fine job on one of my rifles a couple years back. Bill K

[dogdown]

Definitely will check with Bob Green. As soon as work gives me some free time I will check with him. Again, thanks for all the info.