#1
|
|||
|
|||
.22-250 CFE 233 loading
Has anyone tried it in a .22-250? I see over 4300 fps with a 40 grain and over 3900 fps. with a 53 grain bullet. How would the copper fouling be at 4300+? The 53 grain Vmax at 3900 looks really interesting.
|
#2
|
|||
|
|||
22-250 CFE 223 loading
Have tried it with the 50 grain bullet and it works very well. Will try it with some others later this spring. No real complaints on cleaning and did not really notice if copper cleaning is better on this rifle. Bill K
|
#3
|
|||
|
|||
Used it in my son's Remington 700 SPS with good results. Five 55 gr Nosler Varmageddons shot into a 1/2" group at 100 yards. That was better than varget with the same bullet.
|
#4
|
|||
|
|||
Yep very impressed with it. Have found its not quite as good as our aussie made powders in temperature sensitivity but not to bad.
|
Thread Tools | |
Display Modes | |
|
|