#1
|
|||
|
|||
lil gun in .17 fb or mach4
hi
i have seen the question asked on a uk from, i think lil gun would be to fast to get the best out of .17 fb. i would like to hear if any one as tried it? and what resultes they got ? thanks luke |
#2
|
|||
|
|||
To fast, More towards Benchmark or H4198, TAC, 4895H, is what you're looking for. ADam
|
#3
|
|||
|
|||
Lil'Gun.
Quote:
KB.
__________________
" Pay it forward buddy" Get up each morning and don’t let the old man in. (Clint Eastwood). |
#4
|
|||
|
|||
thanks lads
hi all
thanks for that ,its just as throught , |
#5
|
|||
|
|||
Lil"gun is pretty fast but I use it in the 221 FB with very good results and there are published loads in that application. I also use it in 218 bee, and 22 Hornet. It produces the very top velocities, in almost all bullet weights in all of these cartridges. I realize the 17 FB is going to be a little more overbore than the 221 FB but I can't see why Lil"Gun would necessarily not work.
LG and 4198 is listed in the same bullet weights for 17AH, 22 Horent, 218 bee and 221 FB. LG is 61 on the burn chart, 4198 is 71 so 4198 is slower but I am not so convinced that Lil"gun is TOO FAST to work in the 17FB. Now LG does spike pressure quite quickly so a guy would want to work up in tenths. If I was going to try it, I first see if I could get a starting load out of laod data and I would call Hogdon and see if they recommend it. If they think it will work I would ask if they can give you at least a starting point to work up from.. Let us know if you try this out. |
#6
|
|||
|
|||
not goning to try it
hi lads
i use lil gun in my 22hornet 10.3 gr and 45 gr hornady bee bullets so i have the powder a round and saw the same question on a from in here in enland so i throught id ask it here as we are more the sort to play with this, iam using h322 and iam goingto try aa 2460 as i have that too thaks agind for the info Last edited by luke wady; 11-24-2011 at 08:47 PM. Reason: i type with out space some times |
Thread Tools | |
Display Modes | |
|
|