|
|
|
| |
|
#1
11-02-2009, 05:34 PM
|
|||
|
|||
.17AB rechamber
Looking to have a contender barrel rechambered from .17HMR to .17AB. Gunsmith you would recommend? Thanks
Mark 
|
|
#2
11-02-2009, 09:24 PM
|
|||
|
|||
|
gunsmith?
Bob Green is the only one I have had chamber a rifle for me, so far.
VERY happy. Will use him again. There are a ton of smiths around, and I am sure there are some that specialize in T/C's too.
__________________
Pray for Obama. Psalms 109:8 American King James Version Let his days be few; and let another take his office
|
|
#3
11-03-2009, 01:43 AM
|
|||
|
|||
|
Ott
I have a Encore barrel that started as a 223 and was rechambered into a 22/30-30AI and it was done by OTT. They use a EDM process to re-chamber. There are also others here that have had TC barrels redone by OTT(On Target Technologies).
|
|
#4
11-05-2009, 12:47 AM
|
|||
|
|||
|
Been there, have the T shirt.
Mark,
For myself, I rechambered a TC barrel to 17 ackley hornet. (I do no gunsmithing work for others.) I see no reason a 17 bee shouldn't work well. The rechambering job is straight forward & any competent gunsmith should be able to do the job. The only thing to watch is that chips don't get under the extractor & hold it away from the barrel. My 17AH seems to like the 20gr bullets best, but 25gr bullets shoot pretty well. Regards, Ron
|
|
#5
11-06-2009, 01:43 AM
|
|||
|
|||
|
Rechambering a 17 HMR to 17 Ackley Bee
Give MGM a call (http://www.matchgrademachine.com/gunshop/home.php), they have rechambered a number of 17 HMR and 17 Mach 2 T/C Contender barrels for me with good results.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
