|
#1
|
|||
|
|||
20/222 load
Right guys just finished bottle off v133 I was using in my 20/222,cannot get this powder any more here in Australia was thinking off using 8208
What is everyone else using and how much Cheers jack |
#2
|
|||
|
|||
I use H322 and 40gr Bergers in my 20-222. I'll have to look later when I get a chance but if I recall I'm using 22.5gr H322 with those 40's.
|
#3
|
|||
|
|||
Fair dinkum Jack, 2207 or BM1 are the answers to your prayers, I use 2207, cause I have a heap, Marcus uses BM! cause he gets good speed out of it and flows better through the powder measure.
|
#4
|
|||
|
|||
I use 8208 in my 20 Extreme with great results. 21.2 grains with either the 40 or 55 grain Bergers does the trick. It is a bit of a stout load so start lower
|
#5
|
|||
|
|||
Hey camel was going too try benchmark 1 but was talking too tony z the other day and he’s using 8208 with good speed and accuracy.
Thanks for the replies guys will be using 32grain zmax as I have a 1000 or so off them 5o use up |
#6
|
|||
|
|||
Yeah, Tony Z seems to like 8208, not much difference in the three powders from what I can see, guess it comes down to which one is readily available in a continuous supply, I buy 2207 mainly because I can get it easily out here in the sticks, it works well in my other 222 based cartridges, and when I started with the 20/222, its what I had, haven't seen the need to change.
|
Thread Tools | |
Display Modes | |
|
|