Saubier.com  



Go Back   Saubier.com > Saubier.com Forums > Small Caliber Discussion Board

Reply
 
Thread Tools Display Modes
  #1  
Old 08-28-2020, 09:48 PM
Aussie steve Aussie steve is offline
Senior Member
 
Join Date: Feb 2007
Posts: 130
Default Anybody willing to order and on send a set of dies for me

Hi guys, I am trying to buy a set of 6mm TCU dies, .but nobody in Australia has them and Midway wont ship out here. Is anybody here willing to order the dies and send them on to me?

Steve
Reply With Quote
  #2  
Old 08-28-2020, 10:50 PM
TinMan TinMan is offline
Senior Member
 
Join Date: Sep 2006
Posts: 2,469
Default

There have been changes in the U.S. export laws in the recent years. There are severe penalties with ITAR and Export Control procedures now. Most dealers won't sell outside of the U.S. anymore. Be careful.
Reply With Quote
  #3  
Old 08-28-2020, 10:53 PM
Aussie steve Aussie steve is offline
Senior Member
 
Join Date: Feb 2007
Posts: 130
Default

AFAIK reloading dies were never part of it, and the ITAR restrictions have changed again, being relaxed quite a bit.
Reply With Quote
  #4  
Old 08-29-2020, 05:36 AM
georgeld georgeld is offline
Senior Member
 
Join Date: Sep 2006
Location: Pueblo, CO
Posts: 5,539
Send a message via MSN to georgeld
Default

Steve:

PM coming
__________________
George

"Gun Control is NOT about guns,
it's about CONTROL!!"
Reply With Quote
  #5  
Old 08-29-2020, 10:25 AM
Foxhunter223 Foxhunter223 is offline
Senior Member
 
Join Date: May 2007
Location: Coffs Harbour, Australia
Posts: 584
Default

Steve,
Contact Amy Parosky at Bruno's, she is ace to deal with and they have great prices.
Pete
__________________
Whatever is not nailed down is mine. What I can pry loose is not nailed down.
Reply With Quote
  #6  
Old 08-29-2020, 12:47 PM
Hog Patrol Hog Patrol is offline
Senior Member
 
Join Date: Sep 2011
Location: DE
Posts: 1,368
Default

Brownell's sells international. They may be able to ship to you.
Reply With Quote
  #7  
Old 08-30-2020, 05:00 AM
Kiwishooter Kiwishooter is offline
Supporting Member
 
Join Date: Jun 2008
Posts: 1,607
Default

Quote:
Originally Posted by TinMan View Post
There have been changes in the U.S. export laws in the recent years. There are severe penalties with ITAR and Export Control procedures now. Most dealers won't sell outside of the U.S. anymore. Be careful.
When I read the ITAR regulations it was clear by my interpretation of them they never covered reloading equipment except "automatic reloading equipment" so as long as the reloading equipment was manual "handloading equipment" it was excluded.
Ordinary dies, presses, scales etc did not require an export permit.

Now I seem to recall that these regulations changed recently and now most firearms related items that were covered under ITAR are now covered under Commerce dept.

Check out these links for more detail
https://www.dlapiper.com/en/peru/ins...-have-arrived/

https://www.federalregister.gov/docu...s-i-ii-and-iii

Don't get me wrong brass and bullets did require an export permit under ITAR but "handloading equipment" did not.

I also found this on Benchrest Bulletin http://bulletin.accurateshooter.com/tag/itar/

Although there were some countries nothing could be exported to without a permit and if you applied you most likely wouldn't get one.

Most didn't want to try and interpret the laws so just put a blanket rule in place.

Kiwi

Last edited by Kiwishooter; 08-30-2020 at 05:09 AM.
Reply With Quote
  #8  
Old 08-30-2020, 06:04 AM
georgeld georgeld is offline
Senior Member
 
Join Date: Sep 2006
Location: Pueblo, CO
Posts: 5,539
Send a message via MSN to georgeld
Default

Lot's of good responses and info.

Back when oblama was screwing with things.
Friend Jack sent some brass to So. Africa. Never got there.
Then one day two or three Homeland Security guys showed up
at his house threatening him. He got the message:
"Don't Do It Again Jack!!"

Now with Trump changing many of those things back to the way
they should be allowed. It's had to keep up with.
Just because of Jack's visitor's I've stopped sending brass, bullets and
barrels over seas like i had been. Not worth it to fight such a battle.
No way I could afford such a fine.

Had a local guy get sentenced to several years but, he was shipping quite
a bunch of guns and gun parts I think to Asia, and/or the arabs maybe. that's
just asking for it. One varmint barrel every couple years shouldn't be anything to amount to much imo. BUT: I won't do that again.
__________________
George

"Gun Control is NOT about guns,
it's about CONTROL!!"
Reply With Quote
  #9  
Old 08-30-2020, 03:12 PM
Nor Cal Mikie Nor Cal Mikie is offline
Supporting Member
 
Join Date: Jul 2010
Location: 125 miles North of San Francisco.
Posts: 1,003
Default

Been a few years back but on one of the forums I visit, a guy wanted a "tactical style" shotgun stock. He was in Oz. Found the stock he wanted, took it apart and shipped it in two smaller packages. Made it easier to ship.
He got the first one with no issues but Customs got the second one and paid him a visit. Got his computer and he mentioned that they treated him like a terrorist.
I never heard from him again but learned a lesson. I DON'T ship anything to OZ, no matter what anybody says.

Sister married a Guy from Canada. They moved back and forth from Canada and toured all over the U.S.
Sister had a lady friend in Canada so she shipped her a silk blouse from the U.S. Customs got it and it was never seen again. Don't ship ANYTHING if you don't know the rules!!
Reply With Quote
  #10  
Old 08-31-2020, 06:30 PM
Double D Double D is offline
Senior Member
 
Join Date: Jun 2007
Location: Edmond, OK
Posts: 556
Default

Nor Cal Mikie has it right. I'll add this additional in that request like these, should never be made in public until you know the law

Signed DoubleD you resident retired Customs Inspector.
__________________
Douglas,
Gopher Damage Mitigator, Retired
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:31 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.