Saubier.com  



Go Back   Saubier.com > Saubier.com Forums > Small Caliber Discussion Board

Reply
 
Thread Tools Display Modes
  #1  
Old 04-27-2020, 09:58 PM
wahoowad wahoowad is offline
Senior Member
 
Join Date: Oct 2010
Location: Virginia
Posts: 146
Default Rusty spot up inside my Browning A-bolt Micro Hunter 22 Hornet?

Groundhog season is upon us so I was giving my A-bolt 22 Hornet a cleaning in anticipation of a range day tomorrow to check my zero. First patch came out surprisingly dirty and rusty looking, and with subsequent patches I was feeling a rough spot an inch or two up into the throat. I always use my bore guide, so whatever I was feeling was about 2 inches past that.

It smoothed out some after hitting it with a bronze bore brush but I can still feel the patch sliding past something rougher than the rest of the bore. I assume it just developed a rusty spot somehow although thought I had always babied this sweet little shooter.

Gun is a 2010 model and I only have 120 shots down it. I'm just gonna shoot it tomorrow and see how it does, I usually don't clean it after zeroing for the season unless it sees really heavy use. Any suggestions on how to address it?
Reply With Quote
  #2  
Old 04-27-2020, 11:42 PM
TinMan TinMan is offline
Senior Member
 
Join Date: Sep 2006
Posts: 2,469
Default

What solvent did you use to clean, and did you use a copper solvent, not a powder solvent? I suggest you use some JB bore paste to try to polish that spot to smooth it out some. After cleaning, use some oil to leave a light film in the bore. I would also suggest you clean more frequently.
Reply With Quote
  #3  
Old 04-28-2020, 10:55 AM
56S 56S is offline
Senior Member
 
Join Date: Dec 2017
Location: East Central Ohio
Posts: 107
Default

If you really want to ruin your day spend 50 bucks on Amazon for the Teslong rifle borescope. Then clean it good, shoot it, find out it still shoots great and stop worrying about all the litte imperfections you saw with the borescope.
Reply With Quote
  #4  
Old 04-29-2020, 01:06 AM
rider rider is offline
Supporting Member
 
Join Date: Feb 2007
Location: Pueblo, Co.
Posts: 254
Default

My Browning Micro Medallion has a barrel that looks like a washboard dirt road and still shoots well. (MOA at 100 yards) I just shoot it now and don't look at the interior with the bore scope.
Rider
Reply With Quote
  #5  
Old 04-29-2020, 01:57 PM
Double D Double D is offline
Senior Member
 
Join Date: Jun 2007
Location: Edmond, OK
Posts: 556
Default

I suggest you do nothing until you shoot it an see if you have a problem.

The rule is, "if it ain't broke, don't fix"

It's not unusual for such a problem to just disappear after shooting.
__________________
Douglas,
Gopher Damage Mitigator, Retired
Reply With Quote
  #6  
Old 04-30-2020, 03:46 PM
wahoowad wahoowad is offline
Senior Member
 
Join Date: Oct 2010
Location: Virginia
Posts: 146
Default

Sorry guys, just seeing these responses. Thank you. My email notifications don't appear to be sending. Is that not working here?

I shot it the other day. Easily 1/2" at 100 yards so feeling pretty good. If I'm lucky and see some groundhogs at 22 Hornet range I'll be putting a few more rounds through it over the next couple weeks.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:38 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.