#1
|
|||
|
|||
22ppc Rem 700
Anyone ever make a 22ppc on a Rem 700 action?
Thinking of a XR100 single shot action. Open 223 bolt face to ppc bolt face Sako extractor Chamber barrel in 22ppc Would use for PD shooting. Any thoughts? |
#2
|
|||
|
|||
22 ppc
I built a 22 PPC on a Pacific Tool & Gauge 700 action with a 12 twist heavy Lilja barrel . I shoot 53gr VMAX and it is the MOST accurate P-DOG gun I own with range out to 488yards ( longest shot so far ). If you want to know more, just let me know.
|
#3
|
|||
|
|||
22 ppc
JCM,
Is that a single shot action, or repeater? If repeater, does it feed properly? Single shot or repeater, does it eject empties properly. I am thinking of another PD rifle. Thanks |
#4
|
|||
|
|||
22 ppc
I built a 22ppc on a Stiller Predator single shot action, 24" Pacnor #4 contour 12-twist sporter barrel with a H-S precision 700 ADL stock. It shoots the 53grn V-Max bullets right at 3400fps and is very accurate with IMR 8208XBR powder and Norma 22ppc brass. It is one of my favorite rifles to shoot.
|
#5
|
|||
|
|||
700 22 ppc
Have several Rem actions with 22 or 6 PPC. with a sako extractor a .473 bolt face will work.
I had my 22 PPC on a 700 action rechambered to 22 BR. Slight loss in accuracy and increase in velocity and performance. Plus most 22 PPC reamers have tight necks. My BRs are no turn necks |
#6
|
|||
|
|||
20ppc
I had a 20ppc but I used a std .473 boltface off of a 243 and put a Sako extractor on it. Pulled the cases just fine.
|
#7
|
|||
|
|||
Check out the howa mini. These are nice receivers that are also inexpensive and come with good triggers. I think they are sized better for the ppc than a 700. If you got one in 6.5grendel, same bolt face as ppc, you could swap a barrel and be ready to go. Talk with user msalm, he has done a few of these I think. Another option is the CZ527 that comes in 30commie and would also be a barrel swap away from what you want, and in a smaller package.
|
|
|