#1
|
|||
|
|||
.17 core seating punch
Have just got my first bucket of .635 j4 jackets in .17 to make some 30g open tips, but all my seating punches are too small. As there is such a long wait for such things I thought I would try to turn one up myself or get a local toolmaker to make me one. I wondered what size punch any of you guys were using so I could use that measurement as a datum. I am using Corbin S press and dies.Many Thanks. Don
|
#2
|
|||
|
|||
Don there is a guy in Michigan USA, Mark Spencer that does precision OD and ID grinding if you send him a print of what you want he can fix you up in no time. I have Blackmon dies and press and Mark made me some extra core seating punches in about a weeks time, his e-mail address is Spencerkelly@sbcglobal.net
Dan Honert |
#3
|
|||
|
|||
I'll send those items to England
Thought I would let you know.
Mark |
#4
|
|||
|
|||
Seating punches
Hi Mark
Thanks for that will send you pm Don |
#5
|
|||
|
|||
Send Message with the word " Punch" somewhere
in the title. I'll see it easier.
Thanks, Mark |
#6
|
|||
|
|||
Hi Mark,
Where in Michigan are you located? I am in the Midland area. Oh, I see you are in Standish, not too far away. Do you make other swaging tools or accessories? Dan Last edited by MIBULLETS; 03-02-2011 at 11:15 PM. Reason: found location |
#7
|
|||
|
|||
If you know what you want..
Just let me know. Mark
|
#8
|
|||
|
|||
punches
I might be looking for some external S and H style punches, once I find out what diameter the punch tip needs to be.
I assumed you would make punches from the previous posts, but I was wondering if you got into making any dies? I could use a core forming die about .300". |
#9
|
|||
|
|||
If you can give me a
description, of the punches, I can knock them out. The other item, are you referring to a Squirt die?
Mark |
#10
|
|||
|
|||
Yes a squirt die.
|
Thread Tools | |
Display Modes | |
|
|